Wednesday 9 July 2014

Concrete Supplier- Building Your Concrete Foundation Stronger

Concrete is the foundation of your house. Since it's made of the hard mass you see in foundations or sidewalks, it does not make it perfect. If your concrete foundation is not properly mixed or managed with care, it can crack or even worse, it can cause many problems for the house.

Use Extra Concrete
There are two parts of a concrete foundation. The bottom part is footing whereas the upper part is wall which is positioned on top of footing. Footing is usually wider than the wall. If the building code calls for the footings is15" wide and 6" thick for a one-story house, why not make it at 20" wide and 8" thick? It's done in similar way with the concrete wall. Obviously the extra concrete would make the foundation stronger. And the nice thing is extra cost is kept at lowest amount as most of the work is getting the forms set up; the difference is making the forms wider and deeper. You are paying a little more and getting back more. Or have ready mix concrete supplies in Toronto to get the best materials and mix for your area.


Strengthen Your Concrete Foundation
Strength of concrete is generally determined by a mix in pound per square inch which is denoted as psi. A mix of 2,500 or 3,000 psi is standard conditions for the concrete foundation of a house. You could make it stronger by using 3,500 psi. Though, using 4,000 or 5,000 psi is way overload. Have your concrete supplier in Toronto with experience in concrete design provide specification on the exact mix for good performance. Another way to reinforce or strengthen your concrete foundation is to use two rows of steel in the footings. Such bars are 5/8" thick alike steel rods. You can also strengthen the walls with rebars. Many companies supply concrete in Toronto with free shipping close to their area.

During pouring of concrete mix into the foundation wall forms, it is significant the crew follow instantly with thumping of the concrete wall panels by hitting the sides with a hammer or a small sledge with rubber head. This keeps the wet concrete in a consistent mix preventing empty space in concrete. For the next few days, to avoid cracking the concrete should be kept wet using a water hose, mainly if the weather is very dry. The crew will strip off the forms in less than 24 hours.

No comments:

Post a Comment